How to process GRIB2 weather data for wind turbine applications (GeoJSON)

Downloading the Data

The first step is downloading data from Spire Weather’s File API.

This tutorial expects the GRIB2 messages to contain NWP data from Spire’s Renewable Energy data bundle.

For information on using Spire Weather’s File API endpoints, please see the API documentation and FAQ.

The FAQ also contains detailed examples covering how to download multiple forecast files at once using cURL.

For the purposes of this tutorial, it is assumed that the GRIB2 data has already been successfully downloaded, if not get a sample here.

Understanding filenames

Files downloaded from Spire Weather’s API solutions all share the same file naming convention.

Just from looking at the filename, we can determine:

• the date and time that the forecast was issued
• the date and time that the forecasted data is valid for
• the horizontal resolution of the global forecast data
• the weather data variables that are included in the file (see the full list of Spire Weather’s commercial data bundles)

For more detailed information on the above, please refer to our FAQ.

Python Requirements

The following Python packages are required for this tutorial.

Although using conda is not strictly required, it is the officially recommended method for installing PyNIO (see link below).

Once a conda environment has been created and activated, the following commands can be run directly:

• conda install -c anaconda xarray

  • Details: http://xarray.pydata.org/
  • https://anaconda.org/anaconda/xarray

• conda install -c conda-forge pynio

  • Details: https://www.pyngl.ucar.edu/Nio.shtml
  • https://anaconda.org/conda-forge/pynio

If you’re having trouble with PyNIO, you can use cfgrib as the xarray engine instead: https://pypi.org/project/cfgrib/

• conda install -c anaconda pandas

  • Details: https://pandas.pydata.org/
  • https://anaconda.org/anaconda/pandas

• conda install -c conda-forge gdal

  • Details: https://gdal.org/
  • https://anaconda.org/conda-forge/gdal

Inspecting the Data

After downloading the data and setting up a Python environment with the required packages, the next step is inspecting the data contents in order to determine which weather variables are available to access. Data inspection can be done purely with PyNIO, but in this tutorial we will instead use PyNIO as the engine for xarray and load the data into an xarray dataset for transformation. Note that an explicit import of PyNIO is not required, so long as it’s installed properly in the active Python environment.

First, import the xarray package:

import xarray as xr

Next, open the GRIB2 data with xarray using PyNIO as its engine (note that the GRIB2 data should be from Spire’s Renewable Energy data bundle):

ds = xr.open_dataset("path_to_renewable_energy_file.grib2", engine="pynio")

Finally, for each of the variables, print the lookup key, human-readable name, and units of measurement:

for v in ds:
    print("{}, {}, {}".format(v, ds[v].attrs["long_name"], ds[v].attrs["units"]))

The output of the above should look something like this, giving a clear overview of the available data fields:

TMP_P0_L103_GLL0, Temperature, K
UGRD_P0_L103_GLL0, U-component of wind, m s-1
VGRD_P0_L103_GLL0, V-component of wind, m s-1
DSWRF_P8_L1_GLL0_acc, Downward short-wave radiation flux, W m-2

Since this tutorial covers working with GRIB2 data at different vertical levels, we should also inspect the level_type field:

for v in ds:
   if "level_type" in ds[v].attrs:
      print("{}, {}".format(v, ds[v].attrs["level_type"]))

The output of the above should look like this:

TMP_P0_L103_GLL0, Specified height level above ground (m)
UGRD_P0_L103_GLL0, Specified height level above ground (m)
VGRD_P0_L103_GLL0, Specified height level above ground (m)
DSWRF_P8_L1_GLL0_acc, Ground or water surface

Notice that three of the included variables have the same level_type value of Specific altitude above mean sea level (m).

This means that the same exact methodology can be used to process these variables at different vertical levels, though for the purpose of this tutorial we will stick to looking at just the wind component variables: UGRD_P0_L103_GLL0 and VGRD_P0_L103_GLL0.

Understanding Height Values

To better understand available depth values, we can start by printing metadata for one of the wind component variables:
print(ds["UGRD_P0_L103_GLL0"])
The output of the above should look something like this:

<xarray.DataArray 'UGRD_P0_L103_GLL0' (lv_HTGL0: 3, lat_0: 1441, lon_0: 2880)>
[12450240 values with dtype=float32]
Coordinates:
  * lv_HTGL0  (lv_HTGL0) float32 80.0 100.0 120.0
  * lat_0     (lat_0) float32 90.0 89.875 89.75 89.625 ... -89.75 -89.875 -90.0
  * lon_0     (lon_0) float32 0.0 0.125 0.25 0.375 ... 359.625 359.75 359.875
Attributes:
    center:                                         US National Weather Servi...
    production_status:                              Operational products
    long_name:                                      U-component of wind
    units:                                          m s-1
    grid_type:                                      Latitude/longitude
    parameter_discipline_and_category:              Meteorological products, ...
    parameter_template_discipline_category_number:  [0 0 2 2]
    level_type:                                     Specified height level ab...
    forecast_time:                                  [84]
    forecast_time_units:                            hours
    initial_time:                                   11/10/2020 (00:00)

At the end of the first line, the list contains not only the lat_0 and lon_0 index names we would expect after the basic tutorial, but also a new one called lv_HTGL0.
We know from our previous print statement that lv_HTGL0 refers to Specified height level above ground (m), and the fourth line of the latest print output provides a preview of lv_HTGL0 values. From this information, we can intuit that there is a third index for this data called lv_HTGL0 which corresponds to the height of the data in meters.
We can print metadata on an index with the same method used to inspect variables:
print(ds["lv_HTGL0"])
The output of the above should look like this:

<xarray.DataArray 'lv_HTGL0' (lv_HTGL0: 3)>
array([ 80., 100., 120.], dtype=float32)
Coordinates:
  * lv_HTGL0  (lv_HTGL0) float32 80.0 100.0 120.0
Attributes:
    long_name:  Specified height level above ground
    units:      m

The first line of the output tells us that there are three possible values, expressed as (lv_HTGL0: 3), and the second line tells us what those values are: [ 80., 100., 120.]
This means that for every unique pair of lat_0 and lon_0 coordinates, there are three distinct vertical level (i.e. height) values which can be retrieved by specifying a lv_HTGL0 value of 80, 100, or 120.

Processing the Data

Now that we know which weather variables and vertical levels are included in the GRIB2 data, we can start processing our xarray dataset.

Filtering the xarray data to a specific variable

With xarray, filtering the dataset’s contents to our variables of interest is accomplished by specifying an array of strings:

ds = ds.get(["UGRD_P0_L103_GLL0","VGRD_P0_L103_GLL0"])

It’s recommended to perform this step before converting the xarray dataset into a pandas DataFrame (rather than filtering the DataFrame later), since it minimizes the size of the data being converted and therefore reduces the overall runtime.

Converting the xarray data into a pandas.DataFrame

To convert the filtered xarray dataset into a pandas DataFrame, simply run the following:

df = ds.to_dataframe()

Filtering the pandas.DataFrame to a specific height

Using the information gathered from the Understanding Height Values section, we can now filter the DataFrame to a specific height.

The first thing we do is copy the height index values (in meters) into a new DataFrame column:

df["height"] = df.index.get_level_values("lv_HTGL0")

Next, we create the expression we will use to filter the DataFrame.

We can filter the wind components data to a height level of 100 meters with the following expression:

height_filter = (df["height"] == 100)

Finally, we apply the filter to the DataFrame:

df = df.loc[height_filter]

Our DataFrame has now been filtered to only include wind components data at a height of 100 meters.

Loading a GeoJSON file with the GDAL Python package

Although the package we installed with conda was named gdal, we import it into Python as osgeo. This is an abbreviation of the Open Source Geospatial Foundation, which GDAL/OGR (a Free and Open Source Software) is licensed through.

To load GeoJSON data into GDAL, we just use GDAL’s CreateGeometryFromJSON function:

from osgeo.ogr import CreateGeometryFromJson

The GeoJSON format is a common standard in the world of geographic information systems. Many pre-existing GeoJSON regions can be downloaded for free online (e.g. national borders, exclusive economic zones, etc.) and custom shapes can also be created in a variety of free software tools, such as geojson.io or geoman.io. For this tutorial we use the country of Italy as our complex polygon, but this could just as easily be the extent of a farm or some other subregional area.

When loading GeoJSON data into GDAL, only the geometry section of the Feature is needed. Here is a simple example of what the GeoJSON input file could contain:

{"type":"Polygon","coordinates":[[[5,35],[20,35],[20,50],[5,50],[5,35]]]}

The GeoJSON input file could also contain data for a MultiPolygon, starting with {"type":"MultiPolygon","coordinates": .... All of the code in this tutorial works the same way whether a Polygon or MultiPolygon geometry is being used.

The GeoJSON file can be loaded into Python using the standard json package, and should then be converted into a Python string:

import os, json

json_filepath = os.path.join("italy.json")
with open(json_filepath) as json_file:
    json_obj = json.load(json_file)
    json_str = json.dumps(json_obj)

Once we have loaded our GeoJSON definition into a Python string, we can create a GDAL geometry object like this:

area = CreateGeometryFromJson(json_str)

Getting the bounding box that contains a GeoJSON area

Eventually we will crop the data to the precise area defined by the GeoJSON file, but this is a computationally expensive process so it’s best to limit the data size first. In theory we could skip the step of cropping to a simple box altogether, but in practice it’s worth doing so to reduce the overall runtime.

GDAL makes it easy to calculate the coarse bounding box that contains a complex GeoJSON area:

bbox = area.GetEnvelope()

Coordinate values can then be accessed individually from the resulting array:

min_lon = bbox[0]
max_lon = bbox[1]
min_lat = bbox[2]
max_lat = bbox[3]

The order of geospatial coordinates is a common source of confusion, so take care to note that GDAL’s GetEnvelope function returns an array where the longitude values come before the latitude values.

Cropping the pandas.DataFrame to a geospatial bounding box

Now that the filtered data is converted into a pandas DataFrame and we have the bounds containing our area of interest, we can crop the data to a simple box.

The first step in this process is unpacking the latitude and longitude values from the DataFrame’s index, which can be accessed through the index names of lat_0 and lon_0:

latitudes = df.index.get_level_values("lat_0")
longitudes = df.index.get_level_values("lon_0")

Although latitude values are already in the standard range of -90 degress to +90 degrees, longitude values are in the range of 0 to +360.

To make the data easier to work with, we convert longitude values into the standard range of -180 degrees to +180 degrees:

map_function = lambda lon: (lon - 360) if (lon > 180) else lon
remapped_longitudes = longitudes.map(map_function)

With latitude and longitude data now in the desired value ranges, we can store them as new columns in our existing DataFrame:

df["longitude"] = remapped_longitudes
df["latitude"] = latitudes

Then, we use the bounding box values from the previous section (the components of the bbox array) to construct the DataFrame filter expressions:

lat_filter = (df["latitude"] >= min_lat) & (df["latitude"] <= max_lat)
lon_filter = (df["longitude"] >= min_lon) & (df["longitude"] <= max_lon)

Finally, we apply the filters to our existing DataFrame:

df = df.loc[lat_filter & lon_filter]

The resulting DataFrame has been cropped to the bounds of the box that contains the complex GeoJSON area.

Cropping the pandas.DataFrame to the precise bounds of a GeoJSON area

In order to crop the DataFrame to the precise bounds of the complex GeoJSON area, we will need to check every coordinate pair in our data. Similar to the previous section where we remapped every longitude value, we will perform this action with a map expression.

To pass each coordinate pair into the map function, we create a new DataFrame column called point where each value is a tuple containing both latitude and longitude:

df["point"] = list(zip(df["latitude"], df["longitude"]))

We can then pass each coordinate pair tuple value into the map function, along with the previously loaded GeoJSON area, and process them in a function called check_point_in_area which we will define below. The check_point_in_area function will return either True or False to indicate whether the provided coordinate pair is inside of the area or not. As a result, we will end up with a new DataFrame column of boolean values called inArea:

map_function = lambda latlon: check_point_in_area(latlon, area)
df["inArea"] = df["point"].map(map_function)

Once the inArea column is populated, we perform a simple filter to remove rows where the inArea value is False. This effectively removes data for all point locations that are not within the GeoJSON area:

df = df.loc[(df["inArea"] == True)]

Of course, the success of the above is dependent upon the logic inside of the check_point_in_area function, which we have not yet implemented. Since the GeoJSON area was loaded with GDAL, we can leverage a GDAL geometry method called Contains to quickly check if the area contains a specific point. In order to do this, the coordinate pair must first be converted into a wkbPoint geometry in GDAL:

from osgeo.ogr import Geometry, wkbPoint

OGR_POINT = Geometry(wkbPoint)
OGR_POINT.AddPoint(longitude, latitude)

Once we have our wkbPoint geometry, we simply pass it into the area.Contains method to check if the area contains the point:

if area.Contains(OGR_POINT):
    point_in_area = True

Putting the pieces together, here is what we get for our final check_point_in_area function:

def check_point_in_area(latlon, area):
    # Initialize the boolean
    point_in_area = False
    # Parse coordinates and convert to floats
    lat = float(latlon[0])
    lon = float(latlon[1])
    # Set the point geometry
    OGR_POINT.AddPoint(lon, lat)
    if area.Contains(OGR_POINT):
        # This point is within a feature
        point_in_area = True
    # Return flag indicating whether point is in the area
    return point_in_area

As you can see, the only variable returned by the check_point_in_area function is a boolean value indicating whether the specified point is in the area or not. These boolean values then populate the new inArea DataFrame column. This allows us to apply the filter from above and end up with the precisely cropped data we want:

df = df.loc[(df["inArea"] == True)]

Computing the wind speed and direction from the wind components

Now that the data has been cropped to our area of interest – reducing the total size of our data points – we can compute the wind speed and direction from the eastward (U) and northward (V) wind component values.

First, we need to import some utility functions from Python’s math module:

from math import atan2, pi, sqrt

Then, the wind speed can be computed with the following:

def wind_speed_from_u_v(u, v):
    return sqrt(pow(u, 2) + pow(v, 2))

The wind direction can be computed like so:

def wind_direction_from_u_v(u, v):
    if (u, v) == (0.0, 0.0):
        return 0.0
    else:
        return (180.0 / pi) * atan2(u, v) + 180.0

Note that the values returned by the wind_direction_from_u_v function refer to the meteorological representation of wind direction in degrees:

Meteorological wind direction:
      90° corresponds to wind from east,
      180° from south
      270° from west
      360° wind from north.
      0° is used for no wind.

In order to apply these functions across all data points in our DataFrame, we need to utilize lambda functions:

ws_func = lambda row: wind_speed_from_u_v(
   row["UGRD_P0_L103_GLL0"], row["VGRD_P0_L103_GLL0"]
)
wd_func = lambda row: wind_direction_from_u_v(
   row["UGRD_P0_L103_GLL0"], row["VGRD_P0_L103_GLL0"]
)

Once the lambda functions are defined, we can apply them to the DataFrame and map their output to new data columns:

df["wind-speed"] = df.apply(ws_func, axis=1)
df["wind-direction"] = df.apply(wd_func, axis=1)

We now have new data columns called wind-speed and wind-direction which contain the computed values for each location.

Parsing the forecast time from the filename

Each individual file contains global weather forecast data for the same point in time.

Using our knowledge from the Understanding Filenames section of this tutorial, and assuming that the filename argument is in the expected format, we can write a function to parse the valid forecast time from the filename:

from datetime import datetime, timedelta

def parse_datetime_from_filename(filename):
    parts = filename.split(".")
    # Parse the forecast date from the filename
    date = parts[1]
    forecast_date = datetime.strptime(date, "%Y%m%d")
    # Strip `t` and `z` to parse the forecast issuance time (an integer representing the hour in UTC)
    issuance_time = parts[2]
    issuance_time = int(issuance_time[1:3])
    # Strip `f` to parse the forecast lead time (an integer representing the number of hours since the forecast issuance)
    lead_time = parts[-2]
    lead_time = int(lead_time[1:])
    # Combine the forecast issuance and lead times to get the valid time for this file
    hours = issuance_time + lead_time
    forecast_time = forecast_date + timedelta(hours=hours)
    # Return the datetime as a string to store it in the DataFrame
    return str(forecast_time)

Then, we can create a new DataFrame column for time which stores this value as a string in every row:

timestamp = parse_datetime_from_filename(filename)
df["time"] = timestamp

Although it may seem unnecessary to store the same exact timestamp value in every row, this is an important step if we want to eventually concatenate our DataFrame with forecast data for other times (demonstrated below in Processing Multiple Data Files).

Saving the data to a CSV output file

Perform a final filter on our DataFrame to select only the columns that we want in our output:

df = df.loc[:, ["latitude", "longitude", "time", "wind-speed", "wind-direction"]]

Save the processed DataFrame to an output CSV file:

df.to_csv("output_data.csv", index=False)

Setting the index=False parameter ensures that the DataFrame index columns are not included in the output. This way, we exclude the lat_0, lon_0, and lv_HTGL0 values since we already have columns for latitude and remapped longitude (and all remaining data is at the same height after our filtering).

Please note that converting from GRIB2 to CSV can result in very large file sizes, especially if the data is not significantly cropped or filtered.

Processing Multiple Data Files

It is often desirable to process multiple data files at once, in order to combine the results into a single unified CSV output file.

For example, let’s say that we have just used the Spire Weather API to download a full forecast’s worth of GRIB2 data into a local directory called forecast_data/. We can then read those filenames into a list and sort them alphabetically for good measure:

import glob

filenames = glob.glob("forecast_data/*.grib2")
filenames = sorted(filenames)

From here, we can iterate through the filenames and pass each one into a function that performs the steps outlined in the Processing the Data section of this tutorial.

Once all of our final DataFrames are ready, we can use pandas to concatenate them together like so (where final_dataframes is a list of DataFrames):

import pandas as pd

output_df = pd.DataFrame()

for df in final_dataframes:
    output_df = pd.concat([output_df, df])

We end up with a combined DataFrame called output_df which we can save to an output CSV file like we did before:

output_df.to_csv("combined_output_data.csv", index=False)

Complete Code

Below is an operational Python script which uses the techniques described in this tutorial and also includes explanatory in-line comments.

The script takes three arguments (the wind component variable names are hard-coded in the script):

1. The local directory where the Renewable Energy Weather GRIB2 data is stored

2. The path to the GeoJSON file defining the area of interest

3. The height index value for filtering the data to a single vertical level (80, 100, or 120)

For example, the script can be run like this:

python script.py --source-data grib_directory/ --geojson italy.json --height 100

Here is the complete code:

from osgeo.ogr import CreateGeometryFromJson, Geometry, wkbPoint
from datetime import datetime, timedelta
from math import atan2, pi, sqrt
import xarray as xr
import pandas as pd
import argparse
import glob
import json
import sys
import os

# Only one OGR point needs to be created,
# since each call to `OGR_POINT.AddPoint`
# in the `check_point_in_area` function
# will reset the variable
OGR_POINT = Geometry(wkbPoint)


def wind_speed_from_u_v(u, v):
    """
    Compute the wind speed from the
    eastward and northward wind components
    """
    return sqrt(pow(u, 2) + pow(v, 2))


def wind_direction_from_u_v(u, v):
    """
    Meteorological wind direction
      90° corresponds to wind from east,
      180° from south
      270° from west
      360° wind from north.
      0° is used for no wind.
    """
    if (u, v) == (0.0, 0.0):
        return 0.0
    else:
        return (180.0 / pi) * atan2(u, v) + 180.0


def parse_datetime_from_filename(filename):
    """
    Assuming that the filename matches Spire's naming convention,
    this function will parse the valid forecast time from the filename.
    Example filename: `sof-d.20200401.t00z.0p125.renewable-energy.global.f006.grib2`
    """
    parts = filename.split(".")
    # Parse the forecast date from the filename
    date = parts[1]
    forecast_date = datetime.strptime(date, "%Y%m%d")
    # Strip `t` and `z` to parse the forecast issuance time (an integer representing the hour in UTC)
    issuance_time = parts[2]
    issuance_time = int(issuance_time[1:3])
    # Strip `f` to parse the forecast lead time (an integer representing the number of hours since the forecast issuance)
    lead_time = parts[-2]
    lead_time = int(lead_time[1:])
    # Combine the forecast issuance and lead times to get the valid time for this file
    hours = issuance_time + lead_time
    forecast_time = forecast_date + timedelta(hours=hours)
    # Return the datetime as a string to store it in the DataFrame
    return str(forecast_time)


def coarse_geo_filter(df, area):
    """
    Perform an initial coarse filter on the dataframe
    based on the extent (bounding box) of the specified area
    """
    # Get longitude and latitude values from the DataFrame index
    longitudes = df.index.get_level_values("lon_0")
    latitudes = df.index.get_level_values("lat_0")
    # Map longitude range from (0 to 360) into (-180 to 180)
    map_function = lambda lon: (lon - 360) if (lon > 180) else lon
    remapped_longitudes = longitudes.map(map_function)
    # Create new longitude and latitude columns in the DataFrame
    df["longitude"] = remapped_longitudes
    df["latitude"] = latitudes
    # Get the area's bounding box
    bbox = area.GetEnvelope()
    min_lon = bbox[0]
    max_lon = bbox[1]
    min_lat = bbox[2]
    max_lat = bbox[3]
    # Perform an initial coarse filter on the global dataframe
    # by limiting the data to the complex area's simple bounding box,
    # thereby reducing the total processing time of the `precise_geo_filter`
    lat_filter = (df["latitude"] >= min_lat) & (df["latitude"] <= max_lat) lon_filter = (df["longitude"] >= min_lon) & (df["longitude"] <= max_lon)
    # Apply filters to the dataframe
    df = df.loc[lat_filter & lon_filter]
    return df


def precise_geo_filter(df, area):
    """
    Perform a precise filter on the dataframe
    to check if each point is inside of the GeoJSON area
    """
    # Create a new tuple column in the dataframe of lat/lon points
    df["point"] = list(zip(df["latitude"], df["longitude"]))
    # Create a new boolean column in the dataframe, where each value represents
    # whether the row's lat/lon point is contained in the GeoJSON area
    map_function = lambda latlon: check_point_in_area(latlon, area)
    df["inArea"] = df["point"].map(map_function)
    # Remove point locations that are not within the GeoJSON area
    df = df.loc[(df["inArea"] == True)]
    return df


def check_point_in_area(latlon, area):
    """
    Return a boolean value indicating whether
    the specified point is inside of the GeoJSON area
    """
    # Initialize the boolean
    point_in_area = False
    # Parse coordinates and convert to floats
    lat = float(latlon[0])
    lon = float(latlon[1])
    # Set the point geometry
    OGR_POINT.AddPoint(lon, lat)
    if area.Contains(OGR_POINT):
        # This point is within a feature
        point_in_area = True
    # Return flag indicating whether point is in the area
    return point_in_area


def process_data(filepath, area, height):
    """
    Load and process the GRIB2 data
    """
    # Load the files with GRIB2 data into an xarray dataset
    ds = xr.open_dataset(filepath, engine="pynio")
    # Rename the wind variables for clarity
    ds = ds.rename({"UGRD_P0_L103_GLL0": "eastward-wind"})
    ds = ds.rename({"VGRD_P0_L103_GLL0": "northward-wind"})
    # Retrieve only the wind values to reduce the volume of data,
    # otherwise converting to a dataframe will take a long time
    ds = ds.get(["eastward-wind", "northward-wind"])
    # Convert the xarray dataset to a DataFrame
    df = ds.to_dataframe()
    # Create a new height column in the DataFrame
    df["height"] = df.index.get_level_values("lv_HTGL0")
    # Filter the height column with the user-specified height value
    height_filter = df["height"] == height
    df = df.loc[height_filter]
    # Perform an initial coarse filter on the global dataframe
    # by limiting the data to the area's bounding box,
    # thereby reducing the total processing time of the `precise_geo_filter`
    df = coarse_geo_filter(df, area)
    # Perform a precise filter to crop the remaining data to the GeoJSON area
    df = precise_geo_filter(df, area)
    # Compute the wind speed
    ws_func = lambda row: wind_speed_from_u_v(
        row["eastward-wind"], row["northward-wind"]
    )
    df["wind-speed"] = df.apply(ws_func, axis=1)
    # Compute the wind direction
    wd_func = lambda row: wind_direction_from_u_v(
        row["eastward-wind"], row["northward-wind"]
    )
    df["wind-direction"] = df.apply(wd_func, axis=1)
    # Parse the filename from the full filepath string
    filename = filepath.split("/")[1]
    # Convert the filename to a datetime string
    timestamp = parse_datetime_from_filename(filename)
    # Store the forecast time in a new DataFrame column
    df["time"] = timestamp
    # Trim the data to just the lat, lon, and wind speed, and wind direction columns
    df = df.loc[:, ["latitude", "longitude", "time", "wind-speed", "wind-direction"]]
    return df


if __name__ == "__main__":
    parser = argparse.ArgumentParser(
        description="Extract wind speed and direction at a specified height, in an area of interest"
    )
    parser.add_argument(
        "--source-data",
        type=str,
        help="The name of the directory containing properly formatted Spire GRIB2 data from the Renewable Energy bundle",
        required=True,
    )
    parser.add_argument(
        "--geojson",
        type=str,
        help="The name of the directory containing the GeoJSON Polygon or MultiPolygon geometry",
        required=True,
    )
    parser.add_argument(
        "--height",
        type=int,
        # Height values in meters:
        choices=[80, 100, 120],
        help="The height (in meters) to retrieve data for",
        required=True,
    )
    # Parse the input arguments
    args = parser.parse_args()
    # Read all data files in the specified directory
    filepath = os.path.join(args.source_data, "*.grib2")
    filenames = glob.glob(filepath)
    # Sort the filenames alphabetically
    filenames = sorted(filenames)
    # Initialize the output DataFrame
    output_df = pd.DataFrame()
    # Load the GeoJSON area
    json_filepath = os.path.join(args.geojson)
    with open(json_filepath) as json_file:
        json_obj = json.load(json_file)
        json_str = json.dumps(json_obj)
    area = CreateGeometryFromJson(json_str)
    # For each file, process the data into a DataFrame
    # and concatenate all of the DataFrames together
    for file in filenames:
        print("Processing ", file)
        data = process_data(file, area, args.height)
        if data is not None:
            output_df = pd.concat([output_df, data])
    # Save the final DataFrame to a CSV file
    # and do not include the index values (`lat_0`, `lon_0`, and `lv_HTGL0`)
    # since we created new `latitude` and `longitude` columns
    output_df.to_csv("output_data_{}{}.csv".format(args.height, "meters"), index=False)

Final Notes

Using the CSV data output from our final script, we can now easily visualize the processed data in a free tool such as kepler.gl. We can also set thresholds for alerts, generate statistics, or fuse with other datasets.

Spire Weather also offers pre-created visualizations through the Web Map Service (WMS) API which you can read more about here.

For additional code samples, check out Spire Weather’s public GitHub repository.